ACE2 Inhibitor, DX600 |
9687-100 |
Biovision |
each |
EUR 210 |
Ace2 Inhibitor Laboratories manufactures the hibiscus tea ace2 inhibitor reagents distributed by Genprice. The Hibiscus Tea Ace2 Inhibitor reagent is RUO (Research Use Only) to test human serum or cell culture lab samples. To purchase these products, for the MSDS, Data Sheet, protocol, storage conditions/temperature or for the concentration, please contact ACE2 Inhibitor. Other Hibiscus products are available in stock. Specificity: Hibiscus Category: Tea Group: Ace2 Inhibitor
Angiotensin II Converting Enzyme (ACE2) Inhibitor Screening Kit |
Biovision |
each |
EUR 744 |
DX 600, cyclic form / ACE2-Specific Peptide Inhibitor |
PHOENIX PEPTIDE |
100 μg |
EUR 255.96 |
Angiotensin I Converting Enzyme 2 -ACE2- Inhibitor Screening Kit |
Elabscience Biotech |
96T |
EUR 480 |
Description: Inhibition Rate |
Angiotensin I Converting Enzyme 2 -ACE2- Inhibitor Screening Kit |
Elabscience Biotech |
each |
Ask for price |
Description: Inhibition Rate |
Ribunuclease Inhibitor / RNase Inhibitor |
GeneOn |
2000 u |
EUR 91.2 |
Ribunuclease Inhibitor / RNase Inhibitor |
GeneOn |
10000 u |
EUR 284.4 |
Spike RBD (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
BPS Bioscience |
96 rxns. |
EUR 600 |
Description: The pandemic coronavirus disease 2019 (COVID-19) is caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). As a first step of the viral replication strategy, the virus attaches to the host cell surface before entering the cell. The Receptor Binding Domain (RBD) of Spike protein recognizes and attaches to the Angiotensin-Converting Enzyme 2 (ACE2) receptor found on the surface of type I and II pneumocytes, endothelial cells, and ciliated bronchial epithelial cells. Drugs targeting the interaction between the Spike protein of SARS-CoV-2 and ACE2 may offer some protection against the viral infection._x000D_ The Spike RBD (SARS-CoV-2):ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors of this interaction. The key to this kit is the high sensitivity of detection of ACE2-Biotin protein by Streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, Spike RBD protein is attached to a 96-well transparent plate. Next, ACE2-Biotin is incubated with Spike RBD on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce color, which can then be measured using a UV/Vis spectrophotometer microplate reader. |
Ace2 Inhibitor information
Spike RBD (B.1.1.7 Variant) (N501Y) (SARS-CoV-2): ACE2 Inhibitor Screening Chemiluminescence Assay Kit |
78140 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The Spike RBD (SARS-CoV-2) UK variant (N501Y):ACE2 Inhibitor Screening Chemiluminescence Assay Kit is designed for screening and profiling inhibitors of the interaction of ACE2 with the UK variant (N501Y) of the SARS-CoV-2 Spike RBD protein. The key to this kit is the high sensitivity of detection of ACE2-Biotin protein by Streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, Spike RBD protein UK variant is coated on a 96-well transparent plate. Next, ACE2-Biotin is incubated with Spike RBD UK variant on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a luminometer or microplate reader capable of reading chemiluminescence. |
Spike Trimer (S1+S2) (B.1.351 Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78174 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The SARS-CoV-2 Spike Trimer (S1+S2) (B.1.351 Variant):ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of this interaction. The key to this kit is that the SARS-CoV-2 Spike Trimer (S1+S2) (B.1.351 Variant) protein provides a more biologically relevant model than monomeric Spike RBD protein for the investigation of SARS-CoV-2/host cell interaction. Only a few simple steps on a microtiter plate are required for the assay. First, SARS-CoV-2 Spike Trimer (S1+S2) (B.1.351 Variant) is coated on a 96-well plate overnight. Next, the proteins are blocked and pre-incubated with the inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which then can be quenched and measured using a UV/Vis microplate reader. |
Spike Trimer (S1+S2) (B.1.1.7 Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78175 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The SARS-CoV-2 Spike Trimer (S1+S2) (B.1.1.7 Variant):ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of this interaction. The key to this kit is that the SARS-CoV-2 Spike Trimer (S1+S2) (B.1.1.7 Variant) protein provides a more biologically relevant model than monomeric Spike RBD protein for the investigation of SARS-CoV-2/host cell interaction. Only a few simple steps on a microtiter plate are required for the assay. First, SARS-CoV-2 Spike Trimer (S1+S2) (B.1.1.7 Variant) is coated on a 96-well plate overnight. Next, the proteins are blocked and pre-incubated with the inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which then can be quenched and measured using a UV/Vis microplate reader. |
Spike S1 RBD (B.1.617.2; Delta Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78277 |
BPS Bioscience |
96 rxns. |
EUR 1045 |
Description: The Spike S1 RBD (B.1.617.2; Delta Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of the interaction between SARS-CoV-2 Spike and human ACE2. The assay requires only a few steps. First, Spike S1 RBD (B.1.617.2; Delta Variant) (SARS-CoV-2) is coated on a 96-well plate overnight. After blocking, the protein is pre-incubated with the inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which can be quenched and measured using a UV/Vis microplate reader. |
Spike S1 RBD (B.1.1.529, Omicron Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78339 |
BPS Bioscience |
96 rxns. |
EUR 1095 |
Description: The Spike S1 RBD (B.1.1.529, Omicron Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of the interaction between the Omicron variant SARS-CoV-2 Spike RBD and human ACE2. The assay requires only a few steps. First, SARS-CoV-2 Spike RBD (B.1.1.529, Omicron Variant) is coated on a 96-well plate overnight. After washing and blocking, the protein is pre-incubated with an inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which can be quenched and measured using a UV/Vis microplate reader. |
Spike Trimer (S1+S2) (P.1; Gamma Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78274 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The Spike Trimer (S1+S2) (P.1; Gamma Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of the interaction between SARS-CoV-2 Spike and human ACE2. The key to this kit is that the Spike Trimer (S1+S2) (P.1 Variant) (SARS-CoV-2) protein provides a biologically relevant model for the investigation of SARS-CoV-2/host cell interaction._x000D_The assay requires only a few steps. First, Spike Trimer (S1+S2) (Gamma Variant) (SARS-CoV-2) is coated on a 96-well plate overnight. After blocking, the protein is pre-incubated with the inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which can be quenched and measured using a UV/Vis microplate reader. |
Spike Trimer (S1+S2) (B.1.617.2; Delta Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78275 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The Spike Trimer (S1+S2) (B.1.617.2; Delta Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of the interaction between SARS-CoV-2 Spike and human ACE2. The SARS-CoV-2 Spike Trimer, included in the kit, provides a biologically relevant model for the investigation of SARS-CoV-2/host cell interaction._x000D_ The assay requires only a few steps. First, Spike Trimer (S1+S2) (Delta Variant) (SARS-CoV-2) is coated on a 96-well plate overnight. After blocking, the protein is pre-incubated with the inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which can be quenched and measured using a UV/Vis microplate reader. |
Spike Trimer (S1+S2) (B.1.617.2.1; Delta Plus Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
78276 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The Spike Trimer (S1+S2) (B.1.617.2.1; Delta Plus Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors or neutralizing antibodies of the interaction between SARS-CoV-2 Spike and human ACE2. The SARS-CoV-2 Spike Trimer, included in the kit, provides a biologically relevant model for the investigation of SARS-CoV-2/host cell interaction._x000D_The assay requires only a few steps. First, SARS-CoV-2 Spike Trimer is coated on a 96-well plate overnight. After blocking, the protein is pre-incubated with the inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which can be quenched and measured using a UV/Vis microplate reader. |
Papain Inhibitor acetate |
T21521L-10mg |
TargetMol Chemicals |
10mg |
Ask for price |
|
Description: Papain Inhibitor acetate |
Papain Inhibitor acetate |
T21521L-1g |
TargetMol Chemicals |
1g |
Ask for price |
|
Description: Papain Inhibitor acetate |
Papain Inhibitor acetate |
T21521L-1mg |
TargetMol Chemicals |
1mg |
Ask for price |
|
Description: Papain Inhibitor acetate |
Papain Inhibitor acetate |
T21521L-50mg |
TargetMol Chemicals |
50mg |
Ask for price |
|
Description: Papain Inhibitor acetate |
Papain Inhibitor acetate |
T21521L-5mg |
TargetMol Chemicals |
5mg |
Ask for price |
|
Description: Papain Inhibitor acetate |
Spike S1 RBD (B.1.1.529 BA.1, Omicron Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Chemiluminescence Assay Kit |
78357 |
BPS Bioscience |
96 rxns. |
EUR 995 |
Description: The Spike S1 RBD (B.1.1.529 BA.1, Omicron Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Chemiluminescence Assay Kit is designed for screening and profiling neutralizing antibodies or inhibitors of the interaction between the Omicron variant SARS-CoV-2 Spike RBD and human ACE2. This kit comes in a convenient 96-well format, with Biotinylated-ACE2, purified Spike RBD (Omicron Variant; B.1.1.529 BA.1) protein, Streptavidin-HRP, and assay buffers for 100 reactions. The assay requires only a few steps. First, SARS-CoV-2 Spike RBD (Omicron Variant; B.1.1.529 BA.1) is coated on a 96-well plate overnight. After washing and blocking, the protein is pre-incubated with an inhibitor or neutralizing antibody. Upon subsequent incubation with Biotin-ACE2, the plate is treated with Streptavidin-HRP followed by addition of a chemiluminescence HRP substrate to produce the luminescence signal. |
MMP-3 Inhibitor acetate |
T37048L-10mg |
TargetMol Chemicals |
10mg |
Ask for price |
|
Description: MMP-3 Inhibitor acetate |
MMP-3 Inhibitor acetate |
T37048L-1g |
TargetMol Chemicals |
1g |
Ask for price |
|
Description: MMP-3 Inhibitor acetate |
MMP-3 Inhibitor acetate |
T37048L-1mg |
TargetMol Chemicals |
1mg |
Ask for price |
|
Description: MMP-3 Inhibitor acetate |